Tooling Systems

CV 40 Shank Tools
Tap Chucks — RC — Tension & Compression
KM SYSTEM
HSK SYSTEM
BT SYSTEM
Rapid-change style.
Tension and compression.
5/8" - 11 UNC drawbar thread.
No capability for through coolant.
RC-CV form A
tap size
order number catalog number adapter size mm inch D1 D2 L1 tension compression lbs.
1615978 CV40TCRC1297 1 M1 - M14 #0 - 9/16 .75 1.42 2.96 .59 .59 2.66
1615979 CV40TCRC2393 2 M5 - M24 5/16 - 7/8 1.22 2.09 3.86 .98 .98 3.58
Quick change tap adapters are available and must be ordered separately; see page 733-734.
For retention knobs, see page 764.
Tap Chucks — RC — Tension & Compression — Coolant
DV SYSTEM
QC / R8 SYSTEMS
Rapid-change style.
Tension and compression.
5/8" - 11 UNC drawbar thread.
High-pressure coolant capability through
the chuck — maximum 50 bar (725 psi).
RC-CV form AD
INDEX TECHNICAL ACCESSORIES
CV SYSTEM
STRAIGHT SHANK
COLLETS / SLEEVES
tap size
order number catalog number adapter size mm inch D1 D2 L1 tension compression lbs.
1615986 CV40CHTCRC1382 1 M1 - M14 #0 - 9/16 .75 1.42 3.82 .59 .59 3.10
1615987 CV40CHTCRC2524 2 M5 - M24 5/16 - 7/8 1.22 2.09 5.23 .79 .79 5.30
Quick-change tap adapters are available and must be ordered separately; see page 733-734.
For retention knobs, see page 764.
526
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.