Tooling Systems

Collets and Sleeves
DA-L Series Double Angle — Solid Tap — Collets (continued)
INDEX TECHNICAL ACCESSORIES
COLLETS / SLEEVES
HSK SYSTEM
KM SYSTEM
DA-L Tap Collet — Inch / Metric ANSI
(continued from previous page)
STRAIGHT SHANK QC / R8 SYSTEMS DV SYSTEM
CV SYSTEM
BT SYSTEM
tap size
inch mm order number catalog number collet series D1 S10 L9
#0-#6 & 1/8 M3 & M3,15 & M3,5 1016413 LTC6 L .141 .110 .560
#8 & 5/32 M4 1016466 LTC8 L .168 .131 .560
#10 & 3/16 M4,5 & M5 1016469 LTC10 L .194 .152 .560
#12 & 7/32 — 1016472 LTC12 L .220 .165 .560
#14 & 1/4 M6 & M6,3 1016525 LTC025 L .255 .191 .560
1/16P & 1/8P(SS) — 1016528 LTC006P L .314 .234 .560
5/16 M7 & M8 1016531 LTC031 L .318 .238 .560
7/16 — 1016584 LTC043 L .323 .242 .560
1/2 M12 & M12,5 1016587 LTC050 L .367 .275 .560
3/8 M10 1016591 LTC037 L .381 .286 .560
9/16 M14 1016593 LTC056 L .429 .322 .560
1/8P(LS) — 1016656 LTC012P L .438 .328 .560
5/8 M16 1016658 LTC062 L .480 .360 .560
11/16 M18 1016660 LTC069 L .542 .406 .560
1/4P — 1016662 LTC025P L .563 .421 .560
3/4 — 1016663 LTC075 L .590 .442 .560
13/16 M20 1016705 LTC081 L .652 .489 .560
1/2P — 1016706 LTC050P L .688 .515 .560
7/8 M22 1016708 LTC087 L .697 .523 .560
3/8P — 1016710 LTC037P L .700 .531 .560
IMPORTANT: Full length of the gripping bore must be maintained to achieve maximum accuracy and safety.
Collet accuracies are based on size-for-size conditions. Using the collapsible range can influence the accuracy and gripping powers.
Never try to stretch the collets by clamping oversized cutting tools.
732
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.