Tooling Systems

Universal vise to hold HSK forms A, C, and E toolholders for
tightening / locking operations.
Permits simultaneous access to the rear and front end of the toolholders.
Replaces up to 15 separate tightening fixtures.
Holds tools in the horizontal or vertical position.
Can be used either right- or left-handed.
Rigid aluminum construction with bolt holes to secure to bench.
TF — HSK Universal Mount
Accessories
Tightening Fixture — HSK Universal Mount
KM SYSTEM
HSK SYSTEM
L
W
system size
order number catalog number mm inch mm inch
ALL 1254135 UTAV 160,0 6.30 260,0 10.24
BT SYSTEM
For HSK forms A and C, insert sleeve into fixture.
For HSK form E, remove the drive keys before inserting the sleeve adapter.
Sleeve adapters are made from hardened steel with removable keys.
For sizes HSK32 and HSK40, a larger cam disc must be ordered when used
in a horizontal position.
Tightening Fixture — HSK Universal Sleeve
CV SYSTEM
DV SYSTEM
TF — HSK Universal Sleeve
D
D2
system size
order number catalog number mm inch mm inch
40 1254137 HSK40AS 40,0 1.57 98,0 3.86
80 1254160 HSK80AS 80,0 3.15 98,0 3.86
63 1254159 HSK63AS 63,0 2.48 98,0 3.86
100 1254161 HSK100AS 100,0 3.94 98,0 3.86
32 1254136 HSK32AS 32,0 1.26 98,0 3.86
QC / R8 SYSTEMS
STRAIGHT SHANK
Cam disks needed to support HSK32 and HSK40
size ref — HSK catalog number — sleeve order number — cam disk catalog number — cam disk
HSK32 HSK32AS 2241080 536.150
HSK40 HSK40AS 2241080 536.150
COLLETS / SLEEVES
INDEX TECHNICAL ACCESSORIES
759
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. 759