Tooling Systems

CV 50 Shank Tools
Tap Chucks — RC — Tension & Compression — Coolant
KM SYSTEM
HSK SYSTEM
Rapid-change style.
1" - 8 UNC drawbar thread.
Tension and Compression.
High-pressure coolant capability through
the chuck — maximum 50 bar (725 psi).
RC-CV form AD
BT SYSTEM
CV SYSTEM
tap size
order number catalog number adapter size mm inch D1 D2 L1 tension compression lbs.
1615989 CV50CHTCRC1382 1 M1 - M14 #0 - 9/16 .75 1.42 3.82 .59 .59 7.70
1615990 CV50CHTCRC2524 2 M5 - M24 5/16 - 7/8 1.22 2.09 5.23 .79 .79 10.30
1616001 CV50CHTCRC3717 3 M14 - M27 13/16 - 1 3/8 1.89 3.07 7.17 1.38 1.38 16.30
Quick-change tap adapters are available and must be ordered separately; see page 733-734.
For retention knobs, see page 764.
COLLETS / SLEEVES STRAIGHT SHANK QC / R8 SYSTEMS DV SYSTEM
Tap Chucks — RC — Solid — Coolant
Rapid-change style.
1" - 8 UNC drawbar thread.
Solid — No Tension and compression.
High-pressure coolant capability through
the chuck — maximum 50 bar (725 psi).
STRC-CV form AD
tap size
order number catalog number adapter size mm inch D1 D2 L1 lbs.
1615973 CV50CSTRC1290 1 M1 - M14 #0 - 9/16 .75 1.26 2.90 7.20
1615974 CV50CSTRC2350 2 M5 - M24 5/16 - 7/8 1.22 1.97 3.50 8.00
1615976 CV50CSTRC3481 3 M14 - M27 13/16 - 1 3/8 1.89 2.81 4.81 10.60
Quick-change tap adapters are available and must be ordered separately; see page 733-734.
For retention knobs, see page 764.
INDEX TECHNICAL ACCESSORIES
554
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.