Tooling Systems

Balanced-by-design.
1" - 8 UNC drawbar thread.
Through-the-toolholder coolant capability
— form AD or form B.
EM-CV form B/AD
CV 50 Shank Tools
End Mill Adapters
KM SYSTEM
HSK SYSTEM
order number catalog number D1 D2 L1 L9 lbs. clamp screw
wrench sizeclamp
screw ft.lbs
1261776 CV50BEM050462 1/2 1.38 4.62 6.81 7.53 ELS044038PKG 7/32 20
1261777 CV50BEM062375 5/8 1.62 3.75 5.94 7.47 ELS056050PKG 1/4 40
1261778 CV50BEM075375 3/4 1.75 3.75 5.94 7.61 ELS062050PKG 5/16 70
1261779 CV50BEM100400 1 2.00 4.00 3.07 7.91 ELS075056PKG 3/8 110
1261780 CV50BEM125400 1 1/4 2.50 4.00 2.39 8.94 ELS075062PKG 3/8 110
1261781 CV50BEM150400 1 1/2 2.75 4.00 2.82 9.15 ELS075069PKG 3/8 110
IMPORTANT: Do not overtighten clamp screw; use torque recommendations above.
Supplied with clamp screw.
Clamp screw wrench not included.
For retention knobs, see page 764.
BT SYSTEM
CV SYSTEM
Toolholders are factory set to the
form B coolant supply position.
When relocating coolant position
screws, use of a removable liquid
(small screw thread locker)
is recommended.
The toolholder can be easily converted
to DIN 69871 form AD coolant supply;
tightening screws will stop coolant
from escaping through the flange.
DV SYSTEM
QC / R8 SYSTEMS
INDEX TECHNICAL ACCESSORIES
COLLETS / SLEEVES
STRAIGHT SHANK
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. 549