Tooling Systems

Tremendous Grip (3:1 advantage).
Balanced-by-design.
Through-the-toolholder coolant capability.
HSK 40A Shank Tools
TG Single-Angle Collet Chucks
KM SYSTEM
HSK SYSTEM
Collet Capacity
mm
inch
TG Collet Series min. max. min. max.
TG50 1,1 13,5 1/32 17/32
TG75 2,6 20,0 3/64 3/4
BT SYSTEM
TG Round-HSK form A — Metric
order number catalog number collet series D11 L1 L9 V kg locknut
locknut
wrench Nm
stop
screw
wrench sizestop
screw
2455912 HSK40ATG050080M TG50 38 80 42 5 0,45 LNA050M HSW34M 68 SS056041G 4 MM & 5/32
2455993 HSK40ATG075090M TG75 50 90 54 7 0,69 LNA075M HSW45M 136 SS081041G 4 MM & 5/32
Collet must be loaded into locknut first. Before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque.
Collet chuck technical section, see page 816.
Supplied with locknut and stop screw.
Locknut wrench must be ordered separately.
Interchangeable locknuts, coolant-style locknuts, and coolant discs are available and must be ordered separately; see page 746.
Stop screw coolant caps are available and must be ordered separately; see page 757.
Balanceable/Interchangeable locknuts are available and must be ordered separately; see page 740.
TG standard straight-bore collets, see page 657.
TG tap collets, see page 657.
HSK coolant unit and wrench are available and must be ordered separately; see page 763.
CV SYSTEM
DV SYSTEM
QC / R8 SYSTEMS
KM Tooling Systems will soon become an ISO standard!
STRAIGHT SHANK
INDEX TECHNICAL ACCESSORIES
COLLETS / SLEEVES
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. 363