Tooling Systems

Provides "Tremendous Grip" (3:1 advantage) and accuracy
for all drilling applications.
Industry-standard Erickson single-angle collet system.
Grips on back taper and margin of drill for maximum feed
rates and more accurate holes.
Manufactured to DIN6499 Class 2 accuracy, see page 819
TG - Single Angle Collets
Drilling - Milling - Tapping
KM SYSTEM
HSK SYSTEM
50
75
100
150
C = Coolant style - bonded
HP = High-precision
CHP = Coolant / high-precision
NP = Non-pullout (slot for drive)
ST = Solid tapping (slot for drive)
STC = Solid tapping / coolant (slot for drive)
M = collet bore size built
to metric values
(blank) = collet bore size to
inch values
BT SYSTEM
System Size Special Feature (optional) Identification Values
100 TG C 160 M
Collet Style
Collet Bore Size
CV SYSTEM
DV SYSTEM
TG - Tremendous Grip
single angle
metric 010 = 1mm
(xx.x) 160 = 16mm
245 = 24,5mm
inch 0125 = 1/8"
(x.xxx) 0500 = 1/2"
1000 = 1"
QC / R8 SYSTEMS
INDEX TECHNICAL ACCESSORIES
COLLETS / SLEEVES
STRAIGHT SHANK
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. 657