Tooling Systems

KM SYSTEM
HSK SYSTEM
Collets and Sleeves
DA000 Mini Double Angle — Standard — Collets
Provides approximately 1:1 grip for most
drilling, reaming, and tapping applications.
Industry-standard Erickson double-angle
collet system.
0,25mm (.010") range of collapse.
0,025mm (.001") TIR collet accuracy.
STRAIGHT SHANK QC / R8 SYSTEMS DV SYSTEM
CV SYSTEM
BT SYSTEM
DA000 Collet — Metric
D1 order number catalog number collet series
collet capacity
max. mm
collet capacity
min. mm
L9
1,0 1293410 000DA010M DA000 1,00 0,65 7,6
1,3 1293411 000DA012M DA000 1,25 0,90 7,7
1,5 1293412 000DA015M DA000 1,50 1,15 7,8
1,8 1293413 000DA017M DA000 1,75 1,40 7,8
2,0 1293414 000DA020M DA000 2,00 1,65 7,9
2,3 1293415 000DA022M DA000 2,25 1,90 8,0
2,5 1293416 000DA025M DA000 2,50 2,15 8,1
2,8 1293417 000DA027M DA000 2,75 2,40 16,8
3,0 1293418 000DA030M DA000 3,00 2,65 16,8
3,3 1293419 000DA032M DA000 3,25 2,90 16,8
3,5 1293420 000DA035M DA000 3,50 3,15 16,8
3,8 1293421 000DA037M DA000 3,75 3,40 16,8
4,0 1293422 000DA040M DA000 4,00 3,65 16,8
IMPORTANT: Full length of the gripping bore must be maintained to achieve maximum accuracy and safety.
Collet accuracies are based on size-for-size conditions.
Never try to stretch the collets by clamping oversized cutting tools.
DA000 (mini) Double Angle — Standard — Collet Set
An economical way to purchase a set of
collets.
COLLETS / SLEEVES
INDEX TECHNICAL ACCESSORIES
DA000 Collet Set — Metric
order number catalog number series quantity dimensional range incremental division
1293409 000DAS000M DA000 13 1 MM - 4 MM .25
714
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.