Tooling Systems

Through-the-toolholder coolant capability
— form AD or form B.
Suitable for cutting tool shanks to DIN
6535 form HE & DIN 1835 form E.
Axial adjustment.
BT 50 Shank Tools
Whistle Notch Adapters — Short
KM SYSTEM
HSK SYSTEM
WN-BT form B/AD — Metric
order number catalog number D1 D2 L1 L9 V kg clamp screw
wrench sizeclamp
screw Nm
stop
screw
wrench sizestop
screw
1134607 BT50BSWN25075M 25 65 75 60 16 4,60 SS03M027 10 MM 135 571.066 10 MM
1134608 BT50BSWN32075M 32 72 75 64 16 4,80 SS03M029 10 MM 160 571.066 10 MM
IMPORTANT: Do not overtighten clamp screw; use torque recommendations above.
Supplied with clamp screw and stop screw.
Clamp screw or stop screw wrenches not included.
For retention knobs, see page 764.
BT SYSTEM
CV SYSTEM
Toolholders are factory set to the
form B coolant supply position.
When relocating coolant position
screws, use of a removable liquid
(small screw thread locker)
is recommended.
The toolholder can be easily converted
to DIN 69871 form AD coolant supply;
tightening screws will stop coolant
from escaping through the flange.
DV SYSTEM
INDEX TECHNICAL ACCESSORIES
COLLETS / SLEEVES
STRAIGHT SHANK
QC / R8 SYSTEMS
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. 491