Tooling Systems

KM SYSTEM
Collets and Sleeves
DA300 Single Angle — Standard — Collet Set
An economical way to purchase a set of
collets.
HSK SYSTEM
BT SYSTEM
DA300 Collet Set — Metric
order number catalog number series quantity dimensional range incremental division
1297410 300DAS000M DA300 11 1 MM - 6 MM .5
CV SYSTEM
DA300 Collet Set — Inch
order number catalog number series quantity dimensional range incremental division
1289026 S303SET DA300 8 3/64 - 1/4 1/32(3/32-1/4) + 3/64 & 5/64
1289027 S304SET DA300 9 1/8 - 1/4 1/64
1289028 S305SET DA300 5 1/8 - 1/4 1/32
DV SYSTEM
QC / R8 SYSTEMS
STRAIGHT SHANK
DA300 Double Angle — Standard Coolant — Collets
Rubber-filled slots seal collet for coolantfed
tool applications up to 70 bar (1,000
psi).
Provides approximately 1:1 grip for most
drilling, reaming, and tapping applications.
Industry-standard Erickson double-angle
collet system.
0,13mm (.005") range of collapse.
0,025mm (.001") TIR collet accuracy.
COLLETS / SLEEVES
INDEX TECHNICAL ACCESSORIES
DA300 Coolant Collet — Inch
D1 order number catalog number collet series
collet capacity
max. mm
collet capacity
min. inch
L9
1/8 1086631 300DAC0125 DA300 .1250 .1200 1.000
9/64 1086630 300DAC0141 DA300 .1406 .1356 1.000
5/32 1086583 300DAC0156 DA300 .1563 .1513 1.000
11/64 1086633 300DAC0172 DA300 .1719 .1669 1.000
3/16 1086632 300DAC0188 DA300 .1875 .1825 1.000
13/64 1086686 300DAC0203 DA300 .2031 .1981 1.000
7/32 1086685 300DAC0219 DA300 .2188 .2138 1.000
15/64 1086684 300DAC0234 DA300 .2344 .2294 1.000
1/4 1086687 300DAC0250 DA300 .2500 .2450 1.000
IMPORTANT: Inserting the cutting tool less than 2/3 the gripping length into the collet can damage the collet permanently.
Full length of the gripping bore must be maintained to achieve maximum accuracy and safety.
Collet accuracies are based on size-for-size conditions. Using the collapsible range can influence the accuracy and gripping powers.
Never try to stretch the collets by clamping oversized cutting tools.
716
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.