Tooling Systems

KM SYSTEM
BT 40 Shank Tools
Tap Chucks — RC — Solid
Rapid-change style.
Solid — no tension and compression.
No capability for through coolant.
HSK SYSTEM
BT SYSTEM
STRC-BT form A
tap size
order number catalog number adapter size mm inch D1 D2 L1 kg
1778911 BT40STRC1074M 1 M1 - M14 #0 - 9/16 19 36 74 1,40
1778973 BT40STRC2089M 2 M5 - M24 5/16 - 7/8 31 53 89 1,70
Quick-change tap adapters are available and must be ordered separately; see page 733-734.
For retention knobs, see page 764.
QC / R8 SYSTEMS DV SYSTEM
CV SYSTEM
Tap Chuck Adapter — Whistle Notch Style — Short
Through-the-toolholder coolant capability
— form AD.
Suitable for Whistle Notch straight shankstyle
tap chucks.
TA-BT form AD
STRAIGHT SHANK
COLLETS / SLEEVES
wrench sizeclamp
order number catalog number D1 D2 L1 L9 lbs. clamp screw
screw ft.lbs
1017937 BT40TA1106 1.00 2.48 1.06 2.50 1.79 ELS038031PKG 3/16 15
IMPORTANT: Do not overtighten clamp screw; use torque recommendations above.
Supplied with clamp screw.
Clamp screw wrench not included.
For retention knobs, see page 764.
INDEX TECHNICAL ACCESSORIES
472
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.