Tooling Systems

Accessories
Tightening Fixture — 7/24 Steep Taper — Vise Mount
KM SYSTEM
Vise mount pot to hold steep taper toolholders for tightening / locking operations.
INDEX TECHNICAL ACCESSORIES
HSK SYSTEM
BT SYSTEM
CV SYSTEM
TF — ST Vise Mount
D2
L
system size order number catalog number mm inch mm inch
30 1013620 TF30 88,9 3.50 109,5 4.31
40 1013636 TF40 88,9 3.50 122,2 4.81
50 1013638 TF50 133,4 5.25 165,1 6.50
COLLETS / SLEEVES STRAIGHT SHANK QC / R8 SYSTEMS DV SYSTEM
Tightening Fixture — 7/24 Steep Taper — Universal Mount
Universal vise to hold 30, 35, 40, 45 & 50 7/24 steep taper toolholders for tightening / locking operations.
Permits simultaneous access to the retention knob and locknut.
Replaces up to five separate tightening fixtures.
Holds tools in the horizontal or vertical position.
Can be used either right- or left-handed.
Holds most 7/24 tapers including ANSI, ISO, DIN, V-flange, BT, and NMTB.
Handle position is easily changed with a simple button push.
No set-ups, bushings, or spare parts required.
400 Nm (300 ft.-lbs.) maximum torque capacity.
TF — ST Universal Mount
system size order number catalog number
30, 35, 40, 45 & 50 1013591 UTV5030
760
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.