Tooling Systems

Accessories
ER40 Coolant Locknut Sealing Disk Set
An economical way to purchase a group of coolant discs.
KM SYSTEM
ER40 Locknut Coolant Seal Disk Set
HSK SYSTEM
order number catalog number series quantity dimensional range incremental division
1260130 CDER40000M ER40 46 3.5 MM - 26 MM .5 MM
ER coolant disk sets come complete with wooden protective tray.
BT SYSTEM
CV SYSTEM
TG Flush Face Locknut Coolant Cap Accessory
DV SYSTEM
NEW!
Upgrade to a sealed coolant cap!
Advanced features!
QC / R8 SYSTEMS
Use the new Flush Face locknut coolant cap
assembly accessory with standard ER coolant
disks to create a sealed unit without the use
of bonded collets.
Convert to this locknut system from any
existing Kennametal TG collet system to avoid
collet chip packing and ensure an adequate
through-coolant seal.
• Use with high-pressure coolant up to 1,500
PSI (103 bar).
• Use standard TG collets and ER coolant disks.
• More effective than bonded collets.
• Seal against chip packing and machined
contaminants in collet slots and locknuts.
STRAIGHT SHANK
COLLETS / SLEEVES
INDEX TECHNICAL ACCESSORIES
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. 755