Tooling Systems

KM63UT Cutting Units
TOP NOTCH Profiling
BT SYSTEM
CV SYSTEM
QC / R8 SYSTEMS
STRAIGHT SHANK
DV SYSTEM
HSK SYSTEM
KM SYSTEM
NVU 93°
L1 F D min shim clamp
order number catalog number mm inch mm inch mm inch insert 1 shim screw clamp screw kg lbs.
Right hand
2265325 KM63UTNVUCR16 60 2.362 43 1.693 86 3.39 VCGR160408/VPGR332 SM812 MS959 CM113 MS1489 1,29 2.85
Left hand
2265326 KM63UTNVUCL16 60 2.362 43 1.693 86 3.39 VCGR160408/VPGR332 SM812 MS959 CM114 MS1489 1,29 2.85
COLLETS / SLEEVES
INDEX TECHNICAL ACCESSORIES
ER Short Collet Chucks
NEW!
More accurate machining with better repeatability in roughing
and finishing operations!
• Near zero projection length.
• Pre-balanced G2.5 @ 20,000 rpm.
• Standard ER DIN 6499 collets.
• Maximum rigidity for less chance
of vibration for better cutting
conditions.
• CV styles available with or without
protected zone hub in front of
V flange.
• Inch drawbar threads on CV styles.
286
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.