Tooling Systems

CV 50 Shank Tools
KM Modular Adapters
KM SYSTEM
For KM adapters.
1" - 8 UNC drawbar thread.
Through-the-toolholder coolant capability
— form AD or form B.
KM-CV form B/AD
order number catalog number system size D2 D21 L1 L2 lbs.
KM spare
part pkg
wrench sizeactuation
screw ft.lbs
2992484 CV50BKM32157 KM32 1.26 2.75 1.58 .12 6.69 KM32PKG3L 5 MM 6-8
2992485 CV50BKM32354 KM32 1.26 2.75 3.54 1.89 7.29 KM32PKG3S 5 MM 6-8
2992486 CV50BKM40157 KM40 1.57 2.75 1.58 .12 6.64 KM40PKG3L 6 MM 9-12
2992487 CV50BKM40394 KM40 1.57 2.75 3.94 2.28 7.84 KM40PKG3S 6 MM 9-12
2992488 CV50BKM50236 KM50 1.97 2.48 2.36 .16 7.46 KM50PKG3L 10 MM 20-25
2992489 CV50BKM50472 KM50 1.97 2.75 4.72 3.07 7.46 KM50PKG3S 10 MM 20-25
2992490 CV50BKM50630 KM50 1.97 2.75 6.30 4.65 10.29 KM50PKG3S 10 MM 20-25
2992491 CV50BKM63236 KM63 2.48 2.75 2.36 .20 7.43 KM63PKG3S 12 MM 35-40
2992492 CV50BKM63551 KM63 2.48 2.75 5.51 4.06 11.30 KM63PKG3S 12 MM 35-40
2992493 CV50BKM63709 KM63 2.48 2.75 7.09 5.63 13.35 KM63PKG3S 12 MM 35-40
2992494 CV50BKM80319 KM80 3.15 — 3.19 — 9.11 KM80PKG3S 14 MM 58-63
IMPORTANT: Do not overtorque actuation screw. Use torque recommendations above.
Supplied with KM actuation mechanism.
For retention knobs, see page 764.
DV SYSTEM
CV SYSTEM
BT SYSTEM
HSK SYSTEM
Toolholders are factory set to the
form B coolant supply position.
When relocating coolant position
screws, use of a removable liquid
(small screw thread locker)
is recommended.
The toolholder can be easily converted
to DIN 69871 form AD coolant supply;
tightening screws will stop coolant
from escaping through the flange.
QC / R8 SYSTEMS
For HSK adapters to DIN 69893-1 form A
or form C (coolant pipe needs to be
removed).
1" - 8 UNC drawbar thread.
Through-the-toolholder coolant capability
— form AD or form B.
HSK Modular Adapters
STRAIGHT SHANK
COLLETS / SLEEVES
HSK-CV form B/AD
order number catalog number system size D2 L1 lbs.
wrench sizeactuation
screw
ft.lbs
1533058 CV50BHSK50197 HSK50 2.17 1.97 6.39 4 MM 11
1533059 CV50BHSK63236 HSK63 2.76 2.36 6.83 5 MM 15
IMPORTANT: Do not overtorque actuation screw. Use torque recommendations above.
Supplied with actuation mechanism and sealing ring.
For retention knobs, see page 764.
Toolholders are factory set to the
form B coolant supply position.
When relocating coolant position
screws, use of a removable liquid
(small screw thread locker)
is recommended.
The toolholder can be easily converted
to DIN 69871 form AD coolant supply;
tightening screws will stop coolant
from escaping through the flange.
INDEX TECHNICAL ACCESSORIES
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. 557