Tooling Systems

KM SYSTEM
CV 40 Shank Tools
Straight Shank Adapters for Drills with Flats
Through-the-toolholder coolant capability
— form B and AD.
5/8" - 11 UNC drawbar thread.
HSK SYSTEM
BT SYSTEM
CV SYSTEM
SSF-CV form B/AD
order number catalog number D1 D2 L1 L9 lbs. clamp screw
wrench sizeclamp
screw ft.lbs
1749368 CV40BSSF075275 3/4 1.75 2.75 2.25 2.78 ELS062050PKG 5/16 70
1749369 CV40BSSF100450 1 2.00 4.50 3.25 4.12 DWG ELS075050 3/8 110
1749370 CV40BSSF125475 1 1/4 2.50 4.75 3.50 5.46 ELS075056PKG 3/8 110
1749471 CV40BSSF150575 1 1/2 2.75 5.75 4.00 6.99 ELS075056PKG 3/8 110
IMPORTANT: Do not overtighten clamp screw; use torque recommendations above.
Supplied with clamping screws.
Clamp screw wrench not included.
For retention knobs, see page 764.
DV SYSTEM
Toolholders are factory set to the
form B coolant supply position.
When relocating coolant position
screws, use of a removable liquid
(small screw thread locker)
is recommended.
The toolholder can be easily converted
to DIN 69871 form AD coolant supply;
tightening screws will stop coolant
from escaping through the flange.
QC / R8 SYSTEMS
STRAIGHT SHANK
Tap Chuck Adapter — Whistle Notch Style — Short
Through-the-toolholder coolant capability
— form AD.
5/8" - 11 UNC drawbar thread.
Suitable for Whistle Notch straight shankstyle
tap chucks.
COLLETS / SLEEVES
INDEX TECHNICAL ACCESSORIES
TA-CV form AD
order number catalog number D1 D2 L1 L9 lbs.
clamp
screw
wrench sizeclamp
screw ft.lbs
1018054 CV40TA7137 .75 1.75 1.38 1.50 2.20 ELS038031PKG 3/16 15
1017938 CV40TA1137 1.00 1.75 1.38 2.81 1.79 ELS038031PKG 3/16 15
IMPORTANT: Do not over tighten clamp screw; use torque recommendations above.
Supplied with clamp screw.
Clamp screw wrench not included.
For retention knobs, see page 764.
524
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.