Tooling Systems

Tremendous Grip (3:1 advantage).
Balanced-by-design.
5/8" - 11 UNC drawbar thread.
Through-the-toolholder coolant capability
— form AD or form B.
Collet Capacity
mm
inch
TG Collet Series min. max. min. max.
TG50 1,1 13,5 1/32 17/32
TG75 2,6 20,0 3/64 3/4
TG100 2,6 25,5 5/64 1
TG-CV form B/AD — Round Nut
CV 40 Shank Tools
TG Single-Angle Collet Chucks
KM SYSTEM
HSK SYSTEM
BT SYSTEM
order number catalog number collet series D11 L1 L9 V lbs. locknut
locknut
wrench ft.lbs
stop
screw
wrench sizestop
screw
1261620 CV40BTG050500G TG50 1.50 5.00 1.42 3.66 2.88 LNA050M HSW34M 50 SS056041G 4 MM & 5/32
1261621 CV40BTG075275G TG75 1.97 2.75 1.93 .75 2.63 LNA075M HSW45M 100 SS081041G 4 MM & 5/32
1261622 CV40BTG075600G TG75 1.97 6.00 1.93 4.01 4.96 LNA075M HSW45M 100 SS081041G 4 MM & 5/32
1261623 CV40BTG100300G TG100 2.36 3.00 2.64 .67 2.91 LNA100M HSW58M 150 SS094041G 4 MM & 5/32
1261624 CV40BTG100600G TG100 2.36 6.00 2.64 2.95 6.05 LNA100M HSW58M 150 SS094041G 4 MM & 5/32
Collet must be loaded into locknut first. Before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque.
Collet chuck technical section, see page 816.
Supplied with locknut and stop screw.
Locknut wrench must be ordered separately.
Interchangeable locknuts, coolant-style locknuts, and coolant discs are available and must be ordered separately; see page 746.
Stop screw coolant caps are available and must be ordered separately; see page 757.
Balanceable/Interchangeable locknuts are available and must be ordered separately; see page 740.
TG standard straight-bore collets, see page 657.
TG tap collets, see page 657.
For retention knobs, see page 764.
CV SYSTEM
DV SYSTEM
QC / R8 SYSTEMS
Toolholders are factory set to the
form B coolant supply position.
When relocating coolant position
screws, use of a removable liquid
(small screw thread locker)
is recommended.
The toolholder can be easily converted
to DIN 69871 form AD coolant supply;
tightening screws will stop coolant
from escaping through the flange.
STRAIGHT SHANK
INDEX TECHNICAL ACCESSORIES
COLLETS / SLEEVES
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. 515