Tooling Systems

KM SYSTEM
Straight Shank Tools
ER Single-Angle Collet Chucks (continued)
DV SYSTEM
HSK SYSTEM
ER Hex-SS — Inch
(continued from previous page)
BT SYSTEM
CST
D order number catalog number
collet series D11 L LS L9 V lbs.
1.00 1021496 SS100ER20700 ER20 1.34 7.00 5.25 1.42 2.09 1.02
Spare Parts
CV SYSTEM
catalog number
locknut
locknut
wrench
torque-c'bore
collet ft.-lbs.
torque-straight
collet ft.-lbs. stop screw
wrench sizestop
screw
SS100ER20700 LNHSER20M OEW30M 24 59 SS056041G 4 MM & 5/32
QC / R8 SYSTEMS
STRAIGHT SHANK
COLLETS / SLEEVES
INDEX TECHNICAL ACCESSORIES
ER Round-SS — Inch
CST
D order number catalog number
collet series D11 L LS L9 V lbs.
1.00 1021498 SS100ER25750 ER25 1.65 7.50 5.69 1.58 1.97 1.13
Spare Parts
catalog number
locknut
locknut
wrench
torque-c'bore
collet ft.-lbs.
torque-straight
collet ft.-lbs. stop screw
wrench sizestop
screw
SS100ER25750 LNSER25M ER25WM 77 77 SS075041G 4 MM & 5/32
Collet must be loaded into locknut first. Before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque.
Collet chuck technical section, see page 816.
Supplied with locknut and stop screw.
Locknut wrench must be ordered separately.
Interchangeable coolant-style locknuts and coolant discs are available and must be ordered separately; see page 749.
ER standard straight-bore collets, see page 690.
ER tap collets, see page 690.
ER TCT tension-only tap collets, see page 690.
628
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.