C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Main Board TabTable 2-4: Main Board Tab Fields, continuedBox Field/Button DescriptionOpen CollectorOutputsOpen Collector Outputs 1 to4Click this check box to configure the Open Collector (OC)output on the GCM. The system automatically configures theOC output using the values from the default OC outputdefinition. To view or edit the output, click the output’s Viewbutton. See “Configuring Outputs” on page 5-13 for moreinformation.If Online is the default setting for the output and you do notdeselect this option in the OC Output dialog box, the output isset online and downloaded after you click OK in the Controllerdialog box.Deselecting the OC Output check box in the Controller dialogbox, deletes the output.NOTEThe first time you configure an input, output, or reader, you must do sofrom the Controller dialog box for the security object. After a securityobject is defined, you can edit its definition from the Controller dialog boxor by selecting the item from the Hardware drop-down menu on theC•CURE 800/8000 Administration application.C•CURE 800/8000 Hardware Configuration Guide 2–23