C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Selecting Host Modems for Dial OutTo Configure a List of Host Modems/Remote Phone Numbers for DialOut1. In the apC/Controller Dial-Out Components dialog box, select a modemand remote phone number in the Select host modem and remote phonenumber box and click the Add Pair button. The modem/phone numbercombination is added to the Host modems which can contact this panelbox.2. You can select any combination of modems and phone numbers. Forexample, you can enter Modem 1 with three different phone numbers.Also, you can enter a modem/phone number combination more thanonce.NOTETo edit or add a modem to the list of host modems, click the Edit modemsbutton. The Modem Selection browser opens. See “Configuring Panels”on page 3-4 for more information.3. Repeat Step 1 in this procedure for each modem/phone numbercombination that you want to add.4. In the Host modems which can contact this panel box, use the followingbuttons to edit the list of host modem/remote phone numbercombinations.• Remove removes the selected modem/phone number combinationfrom the list.• Remove all removes all modem/phone combinations from the list.• Move up moves the selected modem/phone number combination upone position in the list.• Move down moves the selected modem/phone number combinationdown one position in the list.• The host calls the panel modems/phone numbers in the order that theyare listed in this box.5. Click OK to save the list of modem/phone numbers.8–16 C•CURE 800/8000 Hardware Configuration Guide