C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring Options for apC Dial-up PanelsTable 9-4: Periodic TabBox Field DescriptionPeriodic dialuppanelRedial interval duringcommunications failure:hh:mmTime specificationDial interval during timespecificationhh:mmDial interval outside timespecificationhh:mmEnter the interval of time the host waits to redial the panelwhen there is a communications failure. Enter the time inhh:mm format. The default is 30 minutes.Enter a time specification for periodic dialing of the panel anddownloading configuration changes and cardholderinformation. The default value is $Always.Use Dial interval during time specification to specify howoften during this time specification the host dials the panel;use the Dial interval outside time specification to specifyhow often outside of this time specification the host dials thepanel.For example, if you specify a time specification called Week(Monday through Friday, 9 a.m. to 5 p.m.), and enter thefollowing values:• Interval between dialing during time specification: 01:00• Interval between dialing outside time specification: 03:00the host dials the panel every hour between the hours of9 a.m. and 5 p.m., Monday through Friday; and every threehours 5 p.m. to 9 a.m. Monday through Friday, Saturday andSunday.Enter the frequency that the hosts dials the panel while thetime specification is in effect. Enter the time in hh:mmformat. The time can be from 0 to 99:59 hours. The defaulttime is 1 hour.Enter the frequency that the host dials the panel while thetime specification is not in effect. Enter the time in hh:mmformat. The time can be from 0 to 99:59 hours. The defaulttime is 4 hours.C•CURE 800/8000 Hardware Configuration Guide 9–17