C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring Holiday Lists for a PanelConfiguring Holiday Lists for a PanelNOTEThis section is applicable only if your C•CURE 800/8000 system isoperating in Distributed Holidays mode—enabled on the SystemVariables System tab.For more information about these modes and how to change them andHoliday Lists in general, see Chapter 11 “Holiday Lists” in the C•CURE800/8000 Software Configuration Guide and Chapter 1 “Setting SystemVariables” in the C•CURE 800/8000 System Maintenance Guide.You can download any holiday list to an apC panel from a dialog boxaccessed either from the apC dialog box, or alternatively, from the HolidayList Configuration dialog box.A Holiday List downloaded to an apC panel acts as an override to preventactivation of normally scheduled clearances and timed-based events on theHolidays defined in the Holiday List. You can configure up to 8 holiday listsfor each apC panel.To Select Holiday Lists for the Panel1. On the General tab of the apC dialog box, click the Holiday Lists button.The Select Holiday Lists dialog box opens, as shown in Figure 3-7 onpage 3-16.C•CURE 800/8000 Hardware Configuration Guide 3–15