C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring Add-On Boards for apCsConfiguring Add-On Boards for apCsThe Add-on boards button in the apC dialog box (and apC/8X dialog box) letsyou configure the following add-on boards and controller:• 8 apC I/8 - input modules and 1 apC I/32 System Input board• 8 apC R/8 - output modules and 2 apC R/48 System Output boards• 8 C•CURE Trac controllers (CID) with up to 8 readers per panel• 1 Standard Star Coupler, or• 1 Mini-Star Coupler, or• 1 Wiegand/Proximity Star Coupler (WPSC)The Add-on boards button in the apC/L dialog box lets you configure four I/8- input modules, four R/8 - output modules.Table 6-1: Maximum Number of Boards for apCs, apC/8Xs, apC/Ls and iSTARsI/32 I/8 R/48 R/8apC 1 8 2 8apC/L 0 4 0 4apC/8X 1 8 2 8iSTAR/acm 0 8 0 8iSTAR/2acm 0 16 0 16To Open the Add-on Boards Dialog Box for an apC, apC/8X, or apC/L1. From the apC dialog box (or apC/8X dialog box), click the Add-on boardsbutton. The Add-on Boards dialog box opens. Figure 6-1 on page 6-3shows the Add-on Boards dialog box for an apC (the dialog box is similarfor apC/8Xs).6–2 C•CURE 800/8000 Hardware Configuration Guide