C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Serial Ports TabTable 2-5: Serial Ports Tab FieldsBox Field/Button DescriptionCOM1 Ports Protocol on COM1 Select the type of connection. The two choices are RM orWyreless.Configure port on COM1 If RM is selected, then up to four RM reader devices, eight I/8and eight R/8 devices can be configured (see Figure 2-9). IfWyreless is selected, then up to sixteen Wyreless PanelInterface Modules (PIMs) can be configured, with a maximumof sixteen Wyreless readers, regardless of the number of PIMs.See Figure 2-10 on page 2-26 and Figure 2-11 on page 2-27.COM2 Ports Protocol on COM2 Select the type of connection. The two choices are RM orWyreless.Configure ports on COM2 If RM is selected, then up to four RM reader devices, eight I/8and eight R/8 devices can be configured (see Figure 2-9). IfWyreless is selected, then up to sixteen Wyreless PanelInterface Modules (PIMs) can be configured, with a maximumof sixteen Wyreless readers, regardless of the number of PIMs.See Figure 2-10 on page 2-26 and Figure 2-11 on page 2-27.Figure 2-9: RM Modules on Serial COM1 Dialog Box3. When you click the Configure Device on COM1 or COM2 button, withthe RM bus protocol selected, the RM Modules on Serial COM1 dialogbox will appear. Refer to Figure 2-9 which shows the eight I/8 Input andR/8 Output Boards and four Readers. Click the View buttons to configureup to eight input and output boards and up to four readers.C•CURE 800/8000 Hardware Configuration Guide 2–25