C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

IndexSerial connection, continuedspecify port that master controller communicateswith host via, 1-46Site code A-2Star couplermini-star 6-12, 6-14proximity 6-15standard 6-12unsupervised inputs 3-2Wiegand 6-15Star Coupler dialog box 6-12Supervised inputs 1-4, 2-4, 4-6configuring 5-2 to 5-12defined 3-2System activitykeep-alive messages 1-33, 2-29TTamper inputs 5-18Tamper inputs, described 1-20, 2-19, 2-21TCP port 7-14TCP/IPmaster controller and host communicate via1-46, 1-50, 2-40, 2-44master controller communicates with hostvia 1-46, 2-40master controller communicating with hostvia 1-50, 2-44Time specificationsdownloading to dialup panels 9-3interval for dialing panel 9-17Time zoneapCs, apC/8Xs, apC/Ls 3-6setting, changing controllers 1-15, 2-14Timeout delaysfor ports 7-13Tip symbol xviiUunsupervised inputs 1-5, 2-5Use DTR 8-10VViewing intrusion zones on panels 3-17WWarning symbol xviiWiegand card formatcomplement fields in card 4-31parity length 4-31parity start 4-31Wiegand cards A-6Wiegand Proximity Star Coupler dialog box 6-16Wiegand/proximity star coupler. See StarcouplerIndex–14C•CURE 800/8000 Hardware Configuration Guide