C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring Host ModemsModifying Phone NumbersTo Modify Phone Numbers1. From the General tab in the Modem dialog box, select a phone numberand click the Modify button in the Phone numbers that reach this Modembox. The Modify Existing Phone Number dialog box opens, shown inFigure 8-5.Figure 8-5: Modify Existing Phone Number Dialog BoxNOTEThe Modify existing phone number dialog box also opens when youmodify remote phone numbers for panel modems. See “Selecting HostModems for Dial Out” on page 8-14 for information about the second apCDial-Out Components dialog box.2. In the Phone Number box, change the phone number for the modem andclick OK. The phone number can be up to 35 characters long.8–8 C•CURE 800/8000 Hardware Configuration Guide