C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Viewing Input LinkagesViewing Input LinkagesWhen you configure inputs, you have the option of viewing any groups thatcontain the input, any events that control the input, and any intrusion zonesthat contain the input.NOTEIf you are configuring a new system, there may not be any groups, events,or intrusion zones defined yet. For information about groups, events, andintrusion zones, see the C•CURE 800/8000 Software Configuration Guide.To view linkages for inputs1. From the Input dialog box, click the View Linkages button. The Input -linkages dialog box opens, shown in Figure 5-3.Figure 5-3: Input Linkages Dialog BoxIf you have defined groups for the input, configured an event to performan action on the input, or included the input in an intrusion zone, theinformation shown in Table 5-3 on page 5-12 appears. These fields areread-only; you cannot enter any information.C•CURE 800/8000 Hardware Configuration Guide 5–11