C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

R/48 System Output Boards3. Choose the output you want to add by clicking the appropriate check box.The system automatically configures the output using values from thedefault output definition and an assigned name.NOTETo edit the default output definition, choose Output from the Hardwaremenu and click the Edit Default button in the Output Selection browser.The Output dialog box opens. See “Configuring Outputs” on page 5-13 forinformation about configuring outputs.If Online is the default setting for the output and you do not de-select thisoption, the output is set online and downloaded after you click OK in theapC dialog box.4. To view or edit the output, click the output’s View button. The Outputdialog box opens.5. Edit the output for the add-on board as you would any output on themain panel. See “Configuring Outputs” on page 5-13 for informationabout configuring outputs.6. In the R/48 window, click OK.C•CURE 800/8000 Hardware Configuration Guide 6–11