C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring PanelsTable 3-1: apC Dialog Box Fields, continuedBox Field DescriptionConfigure,continuedHoliday Lists NOTE: This button is available only if your C•CURE 800/8000system is operating in Distributed Holidays mode—enabled on the System Variables System tab. (If thisbutton is unavailable, the system is operating in DefaultHoliday mode: configured Holiday Lists (up to a limit of8) are automatically downloaded to all apC panels ifthe Download to apC check box is selected on theHoliday List Configuration dialog box.)For more information about these modes and how tochange them, see Chapter 11 “Holiday Lists” in theC•CURE 800/8000 Software Configuration Guide andChapter 1 “Setting System Variables” in the C•CURE800/8000 System Maintenance Guide.Click this button to open the Holiday Lists dialog box tochoose up to 8 Holiday Lists for this panel. For detailedinformation, see “Configuring Holiday Lists for a Panel” onpage 3-15.View Intrusion Zones Click this button to open the Intrusion Zones configured onapC dialog box. The Intrusion Zones configured on apCdialog box lets you see which intrusion zones are configuredon that specific panel. See “Viewing the Intrusion Zones onPanels” on page 3-17 for more information.• An apC and an apC/8X can each support up to 8 intrusionzones.• An apC/L can support up to 2 intrusion zones.See the C•CURE 800/8000 Software Configuration Guide formore information about intrusion zones.3–10 C•CURE 800/8000 Hardware Configuration Guide