C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

IndexConnection verification messages, continuedused by controller and master to maintainconnection 1-54, 2-48used by master controller and host tomaintain connection. See Secondarycommunications path 1-51, 2-45Connectionsconfiguring verification messages 1-33, 2-30GCM 1-2losing with host 1-35, 2-32types of 1-7, 2-7verifying with keep-alive messages 1-33,2-29Controller 1-23, 1-49, 2-24, 2-43configurationfirst/second ACM 1-23task list 1-11, 2-10configuringa cluster 1-40, 2-34cluster, designating master controller for1-46, 1-50, 2-40cluster, specifying type of master/hostcommunication connection1-50, 2-44connection used by master tocommunicate with host 1-46,2-40defining inputs on GCM 1-20, 2-19defining output on GCM, RM LCDmessages 1-20, 2-19event activated by controller ifcommunications failure occurson secondary path 1-52, 2-46event activated by host ifcommunications failure occurswith master 1-48, 2-42event activated by master ifcommunications failure occurswith host 1-48, 2-41Hardware MAC address 1-16, 2-15Inputsdefault input definition 1-27Controller 1-23, 1-49, 2-24, 2-43, continuedconfiguringinterval before controller is declared incommunications failure 1-55, 2-49interval between attempts to connect tohost on secondarycommunications path 1-51, 2-45interval between attempts to connect tomaster 1-54, 2-48interval between attempts to re-connectto master after communicationsfailure 1-54, 2-48interval controller, host wait beforedeclaring failure on secondarycommunications path 1-52, 2-46IP address 1-16, 2-15Main Board 1-20, 2-19, 2-20maximum unacknowledged messages1-57, 2-51name of communications failure event1-17, 2-16naming 1-14, 2-13number of attempts to connect to host onsecondary communications path1-51, 2-45number of attempts to connect to masterbefore declaringcommunications failure 1-54,2-48online and offline behaviors 1-14, 2-13overview of 1-11, 2-10R/8 - Output Module, adding 1-28R/8 - Output module, default outputdefinition 1-29R/8 - Output Module, Tamper input1-30responsibility for communications withhost when primary path failureoccurs 1-50, 2-44time zone 1-15, 2-14creating new 1-12, 1-41, 2-11deleting 1-15, 2-14Index–6C•CURE 800/8000 Hardware Configuration Guide