C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring Clusters for iSTAR Classic & iSTAR ProTable 1-9: Cluster Dialog Box Fields, continuedBox Fields/Button DescriptionAdd/AddAll/Remove/Remove AllbuttonsClick these buttons to move controllers between the Controllers inthis cluster and Available Controllers boxes. For example, if youclick Add All, all controllers in the Available Controllers box aremoved to the Controllers in this cluster box. Controllers listed inthe Controllers in this cluster box are members of the cluster.Controllers in thisClusterDisplays a list of controllers that are assigned to the cluster. Acontroller must be assigned to a cluster for C•CURE 800/8000 tocommunicate with the controller. Use the Add and Add All buttons toadd controllers to the cluster by moving them from the AvailableControllers box to the Controllers in this cluster box. Use theRemove and Remove All buttons to take controllers out of thecluster.Other TabsPrimarySecondaryClusterMiscGlobal APBEncryptionThis tab lets you configure the primary communications path for thecluster. See “Configuring the Primary Communications Path” onpage 1-45 for more information.This tab lets you configure the secondary communications path forthe cluster. See “Configuring the Secondary Communications Test”on page 1-56 for information.This tab lets you configure communications between clustermembers and the master. See “Configuring Communications with theMaster” on page 1-53 for information.This tab lets you configure a communications test for the secondarycommunications path and the maximum number of unacknowledgedmessages allowed for each controller. See “Configuring theSecondary Communications Test” on page 1-56 for information.This tab lets you specify if the cluster enforces cluster antipassbackand iSTAR Global Antipassback as well as how the cluster handlesantipassback during communications failure. See “ConfiguringAntipassback for the Cluster” on page 1-58 for information.This tab is unavailable for the iSTAR Pro/Classic.1–44 C•CURE 800/8000 Hardware Configuration Guide