C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Serial Ports TabNOTEYou can configure four Wiegand Readers on GCM or four RM Readers onthe PMB. You can also configure three of one type of reader on GCM andone on the PMB or a pair on each, but never more than a total of four. Youcan configure up to sixteen Wyreless Readers and the first four use up theRM/Direct Readers slots.4. When you click the Configure Device on COM1 or COM2 button withWyreless protocol, the Wyreless Access PIM Modules on Serial COM2dialog box will appear, as shown in Figure 2-10. Click the View buttons toconfigure up to sixteen PIM devices on Communications Port 2.Figure 2-10: Wyreless Access PIM Modules on Serial COM2 Dialog Box5. When you click a View button, the Access Panel Interface on the iSTAReX Controller dialog box will appear, as shown in Figure 2-11 onpage 2-27.2–26 C•CURE 800/8000 Hardware Configuration Guide