C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring Panel Events2. Provide the information shown in Table 3-2 on page 3-14 and click OK tosave the configured panel events.Table 3-2: apC Events Dialog Box FieldsBox Field DescriptionEventsEvent to activate oncommunications failureEvent to activate whenpanel becomes fullEvent to activate whenpanel becomes nearly fullPanel is nearly full when itreachesEnter an event to activate when the panel is in communicationsfailure. Double-click on this box to display a selection browserfor events.Enter an event to activate when the panel is full and cannotaccept any more cardholder records. Double-click on this boxto display a selection browser for events.Enter an event to activate when the panel exceeds thecapacity-used threshold specified in the next field. Double-clickon this box to display a selection browser for events.NOTE: The system determines the “nearly full” capacity byestimating the maximum number of cardholder recordson the panelEnter the percent of apC capacity for cardholder records that,when reached, triggers the associated event (entered in thepreceding field). For example, if you enter 85, the panel eventactivates when this panel reaches approximately 85% ofcapacity. The initial default value is 90.NOTE: The system generates a journal message when thepanel reaches the capacity entered in this field,whether an event is configured or not.3–14 C•CURE 800/8000 Hardware Configuration Guide