C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

PrefaceChapter 9, “Configuring Dialup for apC Panels”This chapter describes how you configure dialup for remotely located apCs,apC/8Xs, and apC/Ls that communicate with the C•CURE 800/8000 host viatelephone lines and modems.For information on setting switches orphysically changing the panel, see the apC Technical Manual (UM-009-F orlater), apC/8X Technical Manual (UM-010), or apC/L Technical Manual (UM-025).Chapter 10, “Configuring Dialup for iSTAR Pro Controllers and Clusters”This chapter describes how you configure dialup for iSTAR controllers andclusters. For information on installing and configuring hardware for thecontroller, see the C•CURE iSTAR Configuration Guide (UM-061) and theC•CURE iSTAR Hardware Installation Guide (UM-060).Appendix A, “A Card Formats Primer”Provides a description of the magnetic, Wiegand, proximity, and encryptedmagnetic card formats. You can define three card formats per reader. Thisappendix briefly describes magnetic, Wiegand, proximity cards, encryptedmagnetic, and offset values for card numbers.xivC•CURE 800/8000 Hardware Configuration Guide