C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring Card FormatsTable 4-13: Card Format TypesFieldFacility/Company CodeSite CodeCard NumberDescriptionData field that should contain identification unique to the company.NOTE: If you are using extended cards and you included Access Facility Code inthe CHUID, do not use this field in the card format. Instead, use the CardNumber field (see below) to configure Access Facility Code in the cardformat. Use Facility Code only for non-extended cards.Field that identifies the issuing site – for companies that issue cards from severallocations.NOTE: When configuring extended cards, you can include multiple Card Numberfields in the card format. However, when using non-extended cards, youcan only configure one Card Number field in the card format.Extended Card Formats: For extended (256-bit) cards, select this field to specifythe location of the following government card fields on the card and in the carddata stream. You can only use these fields for extended card formats.• Agency Code• System Code• Credential• Credential Series Code• Credential Issue Code• HMAC• CardInt1-CardInt4: CardInt fields are user-name fields provided for proprietaryextended card fields that you may use at your site. If you include a CardIntfield in the card format, you must add the field to the Cards tab of thepersonnel view you are using so that you can enter the appropriate data in thefield.• Access Facility Code• Issue CodeNOTE: When configuring extended cards, each Card Number field you configuremust have a different Position Value to specify the location of the field inthe card data stream.• Other Card Formats: For non-extended card formats, select this field tospecify the location of the card number. In this case, the card number is aunique value in the system for each person with the same site or facility code.C•CURE 800/8000 Hardware Configuration Guide 4–33