C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

ACM and ACM Ext Tabs for iSTAR Classic & iSTAR ProFigure 1-10: 1st ACM Ext TabNOTEThe first time you configure a reader, you must do so from the Controllerdialog box for the reader. After a reader is defined, you can edit itsdefinition from the Controller dialog box or by selecting Reader from theHardware pull-down menu on the C•CURE 800/8000 Administrationapplication.4. Provide the information described in Table 1-6 on page 1-25.Table 1-6: ACM Ext Tab FieldsBox Field/Button DescriptionType of moduleSelect the type of ACM. Choices are ACM8 or ACM8W.NOTE: You should select the same type of module that youselected in the 1st ACM or 2nd ACM tab.Input Boards I/8 #1 to #8 Choose the I/8 - Input Module that you want to configure byclicking the appropriate check box and View button for theboard. The I/8 dialog box opens. See “Configuring I/8 - InputModules for iSTAR” on page 1-26 for information.Deselecting the I/8 check box in the Controller dialog box,deletes the I/8 Input Module.C•CURE 800/8000 Hardware Configuration Guide 1–25