C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Input EventsTable 5-2: Input -Events Dialog Box Fields, continuedBoxTime-out causes event in nsecondsTime SpecActivation causes event...duringtime specActivation causes event...outsideof time specDescriptionClick this check box to activate a specified event triggered if the bidirectionalgateway does not receive a status message from the Inovonicstransmitter within the time specified in the time-out event field. Double-clickon the text box to display a list of events to select.In the second field, enter a time in seconds in which the time-out event istriggered. The default value is 600 seconds and the maximum you canenter is 65535 seconds.If this input is on a dialup controller/panel, the events’ dialup settingdetermines whether the panel dials the host when there is a supervisionerror. Use the Dialup box in the second Events dialog box to configure theevent’s dialup setting.This option is selected by default.Enter the time specification to be used for this input. Double-click on thetext box to display a list of time specs from which you can select. Afterselecting a time spec, use the other options in this box to specify events toactivate during the time spec and outside the time spec.$Always is the default time spec.Click this check box to specify you want an event to activate when theinput activates (within the time span of the selected time spec). Enter thename of the event in the text box or double-click on it to choose from a listof possible events. If the input is on a dialup panel, this event’s dialupsetting determines whether the panel dials the host when this inputactivates during the time specification.Use the Dialup box in the second Events dialog box to configure theevent’s dialup setting.Click this check box to specify you want an event to activate when theinput activates (outside the time span of the selected time specification).Enter the name of the event in the text box or double-click on it to choosefrom a list of possible events. If the input is on a dialup panel, this event’sdialup setting determines whether the panel dials the host when this inputactivates outside the time specification.Use the Dialup box in the second Events dialog box to configure theevent’s dialup setting.5–10 C•CURE 800/8000 Hardware Configuration Guide