C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

I/32 System Input BoardsFigure 6-7: Input on I/32 on apC5. Edit the input for the add-on board as you would any input on the mainpanel. See “Configuring Inputs” on page 5-2 for information aboutconfiguring inputs.6. In the I/32 dialog box, click OK to save the input board configuration.To Open the Events Dialog Box1. Open the Hardware menu and choose apC, apC/L or apC/8X. The apCdialog box opens.2. Under Identification, enter the apC Name.3. Click Events to open an Events dialog box, shown in Figure 6-8 onpage 6-8, to configure panel events that activate under the conditionsshown in the list that follows the figure.C•CURE 800/8000 Hardware Configuration Guide 6–7