C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring iSTAR eX ControllersConfiguring iSTAR eX ControllersThe Controller dialog box lets you configure the GCM and PMB.To Configure Controllers1. From the C•CURE 800/8000 Administration application, chooseHardware: iSTAR Controller from the menu bar. The iSTAR ControllerSelection browser appears, shown in Figure 2-3.Figure 2-3: iSTAR Controller Selection Browser2. Click New to create a new controller. The Select Panel Type dialog boxappears, shown in Figure 2-4 on page 2-12.- or -Select a controller and click Edit to edit a controller’s configuration.The Controller dialog box appears, as shown in Figure 2-5 on page 2-12.Go to Step 3 on page 2-12.C•CURE 800/8000 Hardware Configuration Guide 2–11