C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring iSTAR eX ControllersTable 2-3: Controller Dialog Box Fields, continuedBox Field DescriptionHost activates this eventwhen controller is incommunications failureEnter the name of the event that is activated when thiscontroller goes into communications failure. You can doubleclickon this field to open the Event Selection browser whereyou select, edit, or create an event.Specify an event that is located on the host. If the event islocated on a controller, the system displays an error message.NOTE: If this controller is a cluster member, the host activatesthe specified event any time the master goes intocommunications failure. The event is deactivated whencommunications are reestablished with the host usingeither the primary or secondary path.If this controller is a cluster member, the host activates thespecified event any time the master goes into communicationsfailure. The event is deactivated when communications arereestablished with the host using either the primary orsecondary path.Other TabsMain BoardSerial PortsThis tab lets you configure the output and inputs on the GCMand RM LCD messages. See “Main Board Tab” on page 2-19for more information.This tab lets you configure serial ports for the controller. See“Serial Ports Tab” on page 2-24 for more information.2–16 C•CURE 800/8000 Hardware Configuration Guide