C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

ACM and ACM Ext Tabs for iSTAR Classic & iSTAR Pro5. In the R/8 dialog box, provide the information described in Table 1-8 onpage 1-30 in the R/8 Board Status Inputs box and click OK.Table 1-8: R/8 Dialog BoxBoxDescriptionTamper Click this check box to configure the Tamper input on the R/8 -Output Module. This input activates when the R/8 - OutputModule is tampered. If you select this check box, the systemautomatically configures the input using the values from thedefault input definition. To view or edit the input, click the input’sView button. See “Configuring Inputs” on page 5-2 for moreinformation.The input is downloaded to the controller when you click OK inthe Controller dialog box.Deselecting the Tamper check box in the R/8 dialog box,deletes the Tamper input.Communications FailureClick this check box to configure the Communications Failureinput. This input activates when the R/8 - Output Module goesinto communications failure. If you select this check box, thesystem automatically configures the input using the values fromthe default input definition. To view or edit the input, click theinput’s View button. See “Configuring Inputs” on page 5-2 formore information.The input is downloaded to the controller when you click OK inthe Controller dialog box.Deselecting the Communications Failure check box in the R/8dialog box, deletes the Communications Failure input.1–30 C•CURE 800/8000 Hardware Configuration Guide