C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

IndexDoor Switch Monitor (DSM) input 5-5Download wait period 9-15, 10-16DownloadingapC Flash ROM 3-2event activations 9-2DTR off time 8-10, 9-19EEncrypted magnetic card format A-8Encryption on panels 9-4Enter new phone number dialog box 8-7Entry by card number, configuring 4-9Ethernetcluster members and 1-6, 2-6master controller communicates with hostvia TCP/IP over 1-46, 1-50, 2-40,2-44Eventsactivateduring com failure on panel 3-13when panel full 3-13when panel nearly full 3-13activated by controller master ifcommunications failure occurs withhost 1-48, 2-41activated by controller when test ofsecondary communications pathfails 1-57, 2-51activated by host if communications failureoccurs on secondary path 1-52, 2-46activated by host if communications failureoccurs with master 1-48, 2-42controllers in clusters 1-9, 2-9dial into host 9-4, 10-5dial out to panels 9-3, 10-5input 5-7Expiration dateencoded in card format A-3FFacility code A-2Failed connectionsnumber of retries 9-13, 10-14finding more information xvfirmwareabout 1-3, 2-3Fixed card format field A-2FlashRom 3-2GGCM 2-2defined 1-2, 2-2features 1-2, 2-2specifying type See RM, Wyreless 2-25General Controller Module. See GCMGlobal Antipassback Control by Clusterdefined 1-10, 2-9Group 1 tab, RM LCD Messages dialog box 4-17Group 2 tab, RM LCD Messages dialog box 4-18Group 3 tab, RM LCD Messages dialog box 4-19,4-20, 4-22, 4-23HHardware MAC address, specifying forcontroller 1-16, 2-15Help xviHoliday ListsIndex–8C•CURE 800/8000 Hardware Configuration Guide