Câ¢CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

More documents

Recommendations

Info

R/8 — Output Modules3. Choose the output you want to add by clicking the appropriate check box.The system automatically configures the output using values from thedefault output definition and an assigned name.NOTETo edit the default output definition, choose Output from the Hardwaremenu and click the Edit Default button in the Output Selection browser.The Output dialog box opens.See “Configuring Outputs” on page 5-13 forinformation.If Online is the default setting for the output and you do not de-select thisoption, the output is set online and downloaded after you click OK in theapC dialog box.4. To view or edit the output, click the output’s View button. The Outputdialog box opens.5. Edit the output for the add-on board as you would any output on themain panel. See “Configuring Outputs” on page 5-13 for information.6. In the R/8 window, provide the information shown in Table 6-4 onpage 6-20 in the Events box and click OK.Table 6-4: R/8 Dialog Box FieldsBoxActivate this event while boardtamperedActivate this event duringcommunications failuresDescriptionEnter an event to activate when the board istampered.If this board is on a dialup panel, the event’sdialup setting determines whether the panel dialsthe host when the board is tampered. See“Setting Dialup Options for Events” in theC•CURE 800/8000 Software Configuration Guidefor more information.Enter an event to activate when there is acommunications failure between the board andthe panel.If this board is on a dialup panel, the event’sdialup setting determines whether the panel dialsthe host when a communications failure occurs.See “Setting Dialup Options for Events” in theC•CURE 800/8000 Software Configuration Guidefor more information.6–20 C•CURE 800/8000 Hardware Configuration Guide
7Configuring PortsThe C•CURE 800/8000 lets you attach devices, such as controllers, panels,modems, and switchers, to COM ports (serial ports on your PC) and networkports. This chapter explains how to configure both COM and network ports.In this chapter Overview ........................................................................................................................... 7-2 Configuring COM Ports from Windows ...................................................................... 7-3 Configuring Network Ports............................................................................................ 7-6 Configuring Ports from C•CURE 800/8000 ................................................................ 7-8C•CURE 800/8000 Hardware Configuration Guide 7–1
Page 2 and 3:
C•CURE ® and Software House ® a
Page 4:
Table of ContentsConfiguring Holida
Page 9 and 10:
Table of ContentsConfiguring Option
Page 11 and 12:
PrefaceThis C•CURE ® 800/8000 Ha
Page 13 and 14:
PrefaceChapter 4, “Configuring Re
Page 15 and 16:
PrefaceFinding More InformationIn a
Page 17 and 18:
PrefaceConventionsThis manual uses
Page 19 and 20:
1Configuring C•CUREiSTAR Pro/Clas
Page 21 and 22:
Understanding C•CURE iSTAR Contro
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Configuration Overview for iSTAR Cl
Page 31 and 32:
Configuring iSTAR Classic & iSTAR P
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Main Board Tab for iSTAR Classic &
Page 41 and 42:
ACM and ACM Ext Tabs for iSTAR Clas
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Cluster Communications Overview for
Page 51 and 52:
Cluster Communications Overview for
Page 53 and 54:
Maintaining Cluster Communications
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Configuring Clusters for iSTAR Clas
Page 61 and 62:
Configuring Clusters for iSTAR Clas
Page 63 and 64:
Primary Tab for iSTAR Classic & iST
Page 65 and 66:
Primary Tab for iSTAR Classic & iST
Page 67 and 68:
Secondary Tab for iSTAR Classic & i
Page 69 and 70:
Secondary Tab for iSTAR Classic & i
Page 71 and 72:
Cluster Tab for iSTAR Classic & iST
Page 73 and 74:
Cluster Tab for iSTAR Classic & iST
Page 75 and 76:
Misc Tab for iSTAR Classic & iSTAR
Page 77 and 78:
Global APB Tab for iSTAR Classic &
Page 79 and 80:
2Configuring C•CUREiSTAR eX Contr
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Configuring iSTAR eX ControllersCon
Page 91 and 92:
Configuring iSTAR eX ControllersIf
Page 93 and 94:
Configuring iSTAR eX ControllersTab
Page 95 and 96:
Configuring iSTAR eX ControllersCon
Page 97 and 98:
Main Board TabMain Board TabConfigu
Page 99 and 100:
Main Board TabTable 2-4: Main Board
Page 101 and 102:
Main Board TabTable 2-4: Main Board
Page 103 and 104:
Serial Ports TabTable 2-5: Serial P
Page 105 and 106:
Serial Ports TabFigure 2-11: Wyrele
Page 107 and 108:
Cluster Communications Overview•
Page 109 and 110:
Cluster Communications OverviewUse
Page 111 and 112:
Maintaining Cluster CommunicationsE
Page 113 and 114:
Configuring ClustersFigure 2-13: iS
Page 115 and 116:
Configuring ClustersTable 2-6: Clus
Page 117 and 118:
Primary TabPrimary TabConfiguring t
Page 119 and 120:
Primary TabTable 2-7: Primary Tab F
Page 121 and 122:
Secondary TabSecondary TabConfiguri
Page 123 and 124:
Secondary TabTable 2-8: Secondary T
Page 125 and 126:
Cluster TabCluster TabConfiguring C
Page 127 and 128:
Cluster TabTable 2-9: Cluster Tab F
Page 129 and 130:
Misc TabTable 2-10: Misc Tab Fields
Page 131 and 132:
Global APB TabTable 2-11: Global AP
Page 133 and 134:
3Configuring theAdvanced Processing
Page 135 and 136:
Panel OverviewOutputsAn output is a
Page 137 and 138:
Configuring PanelsFigure 3-2: apC S
Page 139 and 140:
Configuring PanelsTable 3-1: apC Di
Page 141 and 142:
Configuring PanelsTable 3-1: apC Di
Page 143 and 144:
Configuring Security Objects on Pan
Page 145 and 146:
Configuring Panel EventsConfiguring
Page 147 and 148:
Configuring Holiday Lists for a Pan
Page 149 and 150:
Viewing the Intrusion Zones on Pane
Page 151 and 152:
4Configuring Readers,RM Reader LCDM
Page 153 and 154:
Configuring ReadersFigure 4-1: Read
Page 155 and 156:
Configuring ReadersTable 4-1: Reade
Page 157 and 158:
Configuring Reader Keypad OptionsCo
Page 159 and 160:
Configuring Reader Keypad OptionsTa
Page 161 and 162:
Configuring Advanced Options for Re
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Configuring RM Reader LCD Messages2
Page 169 and 170:
Configuring RM Reader LCD MessagesT
Page 171 and 172:
Configuring RM Reader LCD MessagesT
Page 173 and 174: Configuring RM Reader LCD MessagesT
Page 175 and 176: Configuring RM Reader LCD MessagesF
Page 177 and 178: Configuring Card Formats2. Click Ne
Page 179 and 180: Configuring Card FormatsFigure 4-16
Page 181 and 182: Configuring Card Formats4. Click OK
Page 183 and 184: Configuring Card FormatsTable 4-13:
Page 185 and 186: 5Configuring Inputs andOutputsThis
Page 187 and 188: Configuring InputsNOTETo edit the d
Page 189 and 190: Configuring InputsTable 5-1: Input
Page 191 and 192: Configuring InputsTable 5-1: Input
Page 193 and 194: Input EventsTable 5-2: Input -Event
Page 195 and 196: Viewing Input LinkagesViewing Input
Page 197 and 198: Configuring OutputsConfiguring Outp
Page 199 and 200: Configuring OutputsTable 5-4: Outpu
Page 201 and 202: Viewing Output LinkagesTable 5-5: O
Page 203 and 204: Tamper and AC Power Failure InputsW
Page 205 and 206: 6Configuring Add-onBoards for apCs
Page 207 and 208: Configuring Add-On Boards for apCsF
Page 209 and 210: I/32 System Input BoardsI/32 System
Page 211 and 212: I/32 System Input BoardsFigure 6-7:
Page 213 and 214: I/32 System Input Boards- Enter the
Page 215 and 216: R/48 System Output Boards3. Choose
Page 217 and 218: Star Couplers2. Select the Star opt
Page 219 and 220: Wiegand/Proximity Star Coupler (WPS
Page 221 and 222: I/8 — Input ModulesI/8 — Input
Page 223: R/8 — Output ModulesR/8 — Outpu
Page 227 and 228: Configuring COM Ports from WindowsC
Page 229 and 230: Configuring COM Ports from WindowsT
Page 231 and 232: Configuring Network PortsFigure 7-1
Page 233 and 234: Configuring Ports from C•CURE 800
Page 239 and 240: 8Configuring andSelecting HostModem
Page 241 and 242: Configuring Host ModemsConfiguring
Page 243 and 244: Configuring Host ModemsFigure 8-3:
Page 245 and 246: Configuring Host Modems• Modify o
Page 247 and 248: Configuring Advanced Options for No
Page 249 and 250: Selecting Host Modems for Dial InSe
Page 251 and 252: Selecting Host Modems for Dial InYo
Page 253 and 254: Selecting Host Modems for Dial OutF
Page 255 and 256: 9Configuring Dialup forapC PanelsTh
Page 257 and 258: apC Dialup Overview• Each input c
Page 259 and 260: apC Dialup OverviewTable 9-1: Confi
Page 261 and 262: Configuring apC Dialup PanelsFigure
Page 263 and 264: Configuring apC Dialup PanelsFigure
Page 265 and 266: Configuring Options for apC Dial-up
Page 275 and 276:
10Configuring Dialup foriSTAR Pro C
Page 277 and 278:
iSTAR Dialup OverviewHost - Cluster
Page 279 and 280:
iSTAR Dialup OverviewDialing Out to
Page 281 and 282:
iSTAR Dialup OverviewTable 10-1: So
Page 283 and 284:
Configuring iSTAR Clusters for Dial
Page 285 and 286:
Configuring iSTAR Clusters for Dial
Page 287 and 288:
Configuring Dialup Options for iSTA
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
AA Card FormatsPrimerThe C•CURE 8
Page 295 and 296:
Card FormatsTable A-1: Card Format
Page 297 and 298:
Magnetic CardsMagnetic CardsMagneti
Page 299 and 300:
Proximity CardsProximity CardsProxi
Page 301 and 302:
Offset Values for Card NumbersOffse
Page 303 and 304:
IndexIndexAAC power fail input on G
Page 305 and 306:
IndexapC/L, continuedevent to activ
Page 307 and 308:
IndexCommunicationsmaintaining 1-35
Page 309 and 310:
IndexController 1-23, 1-49, 2-24, 2
Page 311 and 312:
IndexHoliday Lists, continuedconfig
Page 313 and 314:
IndexMaster controller, continuedco
Page 315 and 316:
IndexPrimary communications path, c
show all

Câ¢CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?

Câ¢CURE 800/8000 Hardware Configuration Guide - Tyco Security ...