C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Main Board TabOnboard Wiegand Readers• Onboard Wiegand Readers 1 to 4 are automatically configured using thevalues from the default reader definition. To view or edit the input, clickthe reader’s View button.Relay Outputs• Relay Outputs 1 to 4 are automatically configured using the values fromthe default output definition. To view or edit the output, click the output’sView button.Open Collector Outputs• Open Collector Outputs 1 to 4 are automatically configured on GCMusing the values from the default output definition. To view or edit theoutput, click the output’s View button.To Configure the Main Board1. From the Controller dialog box, click the Main Board tab. The Main Boardtab opens for the controller, shown in Figure 2-7.Figure 2-7: Main Board Tab for iSTAR eX2. Provide the information shown in Table 2-4 on page 2-21.2–20 C•CURE 800/8000 Hardware Configuration Guide