C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Global APB TabTable 2-11: Global APB Tab FieldsFieldCluster antipassbackcommunications failure mode:Cluster enforces iSTAR Globalantipassback as well as iSTARCluster antipassbackDescriptionIf you are using Cluster Antipassback, you can specify how the Controller enforcesantipassback when in communications failure. You can select:• No Access: where access is denied if any controller in the cluster is incommunications failure, and this controller is not the owner of the presentedcard.• Local: where the iSTAR uses locally available information to grant or denyaccess. If this information is insufficient, the iSTAR will admit the presented card.For information about Global Antipassback, refer to the C•CURE 800/8000Advanced User Guide.Select this option if you want the cluster to share Antipassback information withother antipassback clusters.NOTE: If you select this option, The Cluster Antipassback Failure Mode will beunavailable. You will need to use the iSTAR Global Antipassback Comm.Failure Mode specified in the System Variables.For more information about Global Antipassback, refer to the C•CURE 800/8000Advanced User Guide.C•CURE 800/8000 Hardware Configuration Guide 2–53