C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring Options for apC Dial-up Panels2. Provide the information shown in Table 9-2 on page 9-13 and click OK.Table 9-2: Dialup Components Dialog Box FieldsBox Field DescriptionHost Modems which canbe contacted by this panelHost modems/Host phonenumbersNumber of times to retryfailed connectionsModifyDisplays the host modems and phone numbers that thispanel can call when attempting to contact the host.The panel calls the host modems in the order that they arelisted in this box. A modem/phone combination can be listedmore than once; however, you cannot list more than 8modem/phone combinations.Enter the number of times the panel dials the list of telephonenumbers when the panel cannot contact the host. Forexample, if you enter 2 in this field, the panel dials eachtelephone number in the list once. If a connection is notestablished at the first attempt, the panel dials the telephonenumbers in the list again and then stops dialing.Click this button to edit the list of host modems and phonenumbers. The apC Dial-In Components dialog box opens.See “Selecting Host Modems for Dial In” on page 8-11 formore information.Configuring Dial Out Options for Host and PanelsThe Dial Out tab lets you specify that configuration changes will cause thehost to dial the panel and download the configuration changes within aspecified time.To Configure Dial Out Options for Hosts and Dialup Panels1. From the Dialup Components dialog box, click the Dial Out tab. The DialOut tab opens, shown in Figure 9-8.C•CURE 800/8000 Hardware Configuration Guide 9–13