C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring Host Modems• Modify opens the Modify existing phone number dialog box whereyou edit the selected phone number in the phone number list. See“Modifying Phone Numbers” on page 8-8 for more information.7. Click the Advanced tab to configure advanced options for the modem.See“Configuring Advanced Options for Non-OEM Host Modems” onpage 8-9 for more information. This button is available only if youselected apC as the option in the Modem Use box.8. Click OK. The configuration for the host modem is saved and the Modemdialog box closes.Adding Phone NumbersThere is no formatting standard for phone number entry in the C•CURE 800/800 Modem dialog box. You can enter any combination of 35 alphanumericcharacters in the Phone number field.To Add Phone Numbers1. From the General tab in the Modem dialog box, click the Add button inthe Phone numbers that reach this modem box. The Enter new phonenumber dialog box opens, shown in Figure 8-4.Figure 8-4: Enter New Phone Number Dialog BoxNOTEThe Enter new phone number dialog box also opens when you add remotephone numbers for panel modems. See “Selecting Host Modems for DialOut” on page 8-14 for more information.2. In the Phone number box, enter a phone number for the modem and clickOK. The phone number can be up to 35 characters long.C•CURE 800/8000 Hardware Configuration Guide 8–7