C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Configuring RM Reader LCD MessagesConfiguring RM Reader LCD MessagesRM readers display LCD messages, such as “Present Card” or “AccessGranted” to indicate different states to cardholders. You can customize sets ofthese messages to meet the specific needs of your facility or site. For example,you could change the “Access Granted” message to “Please Enter Now”.When you assign a set of messages to a panel, all the RM readers on that paneluse those same messages.The RM LCD Messages dialog box allows you to configure message sets. Youcan use the default RM LCD Messages dialog box to change the language inwhich your messages appear. See “Changing the Language for the DefaultRM LCD Messages” on page 4-24.NOTEOnly characters in the English character set are supported for display onthe RM reader at this time. No accented characters are supported.To Configure an RM LCD Message Set1. Select Hardware from C•CURE 800/8000 menu bar, then choose RMLCD Messages. The RM LCD Messages Selection browser appears,shown in Figure 4-5.Figure 4-5: RM LCD Messages Selection4–16 C•CURE 800/8000 Hardware Configuration Guide