C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

IndexIP address 7-14, continuedhostrequested over subnet by mastercontroller 1-47, 1-48, 1-51, 1-52,2-40, 2-41, 2-45, 2-46supplied to master controller byConfiguration Utility 1-47, 1-48,1-51, 1-52, 2-40, 2-41, 2-45,2-46masterrequested over subnet by controller1-54, 1-55, 2-48, 2-49supplied to controller by ConfigurationUtility 1-54, 1-55, 2-48, 2-49specifying for controller 1-16, 2-15Issue code A-2iSTAR Configuration Utilityusing to manually configure the master 1-32,2-29KKeep-alive messages. See ConnectionVerificationLLinkagesview for inputs 5-11view for outputs 5-16Linksinputs 5-11outputs 5-16Longitudinal Redundancy Check (LRC) A-3Low battery input, defined 1-20, 2-19MMAC addressobtainingwith Configuration Utility,from GCMlabel 1-16, 2-15Magnetic cards A-5Main BoardAC power fail input, defined 1-20, 2-19configuring 1-20, 2-20Options common to entire panel 1-22,2-22RM Reader LCD messages, specifying1-22, 2-22InputsAC power fail input, configuring 1-21,2-21Low battery input, configuring 1-21,2-21Tamper input, configuring 1-21, 2-21Low battery input, defined 1-20, 2-19OutputconfiguringOutput on GCM 1-22, 2-22, 2-23Tamper input, described 1-20, 2-19, 2-21Master controllerabout 1-5, 2-6alternate. See Alternate Mastercommunicates with host via TCP/IP. See alsoEthernet, Serial connection, RS-232,RS-485 1-46, 1-50, 2-40, 2-44configuringinterval before controller is declared incommunications failure 1-55,2-49interval between attempts to connect tohost on primarycommunications path 1-47, 2-41interval between attempts to connect tohost on secondarycommunications path 1-51, 2-44Index–10C•CURE 800/8000 Hardware Configuration Guide