C•CURE 800/8000 Hardware Configuration Guide - Tyco Security ...

Secondary Tab for iSTAR Classic & iSTAR ProSecondary Tab for iSTAR Classic & iSTAR ProConfiguring the Secondary Communications PathThe Secondary tab in the Cluster dialog box lets you configure a SecondaryCommunications Path for the cluster.To Configure the Secondary Communications Path1. From the Cluster dialog box, click the Secondary tab. The Secondary tabopens for the controller, shown in Figure 1-21.Figure 1-21: Secondary TabNOTEYou cannot select the method of communication between host andcontroller on the Secondary tab if the cluster is online. To put the clusteroffline, deselect the Online check box in the Identification box, click OK toclose the dialog box, and then re-open the dialog box.2. Provide the information shown in Table 1-11 on page 1-50.C•CURE 800/8000 Hardware Configuration Guide 1–49